The service life of radiator steel focuses on maintenance, but the maintenance of radiator steel is not only full of water, but also the maintenance of the surface and heating pipes. Let's take a look.

   Generally speaking, radiator steel needs full water curing. Radiator steel is afraid of alkaline corrosion and electrochemical corrosion. Most boiler water is alkaline. When the system is shut down, this corrosion may accelerate and the ions may become more reactive.

   The copper-aluminum composite radiator has no restrictions on the water quality and the pH value of the residential heating system, and has the advantages of good corrosion resistance, strong corrosion resistance, and good heat dissipation. Compared with the water quality and messy heating system in the north, full water conservation is not required.

Wipe the surface with clean water

   The surface of the radiator steel will inevitably have dirt in the air attached to the surface. Wipe clean with a clean cloth. When easy to clean, wipe with a little soapy water, then wash with a clean cloth. Do not use strong corrosive solutions or sharp hands to scrape, so as not to damage the surface.

clean pipes

   After the steel radiator stops running, the filter screen should be cleaned in time. If excessive deposits are found, it is best to flush the system pipes to prevent the pipes from being clogged due to the deposition of dirt and impurities when the operation is stopped. It will be difficult to sort out after a long time, and it will be difficult to deal with the problems discovered during the next year's operation.

   The above is the content of "Steel radiators need to be maintained at three points". hope this helps.